NASA Logo

NTRS

NTRS - NASA Technical Reports Server

Back to Results
Feasibility of Liquid-Metal Vacuum SealsA basic component of any ultrahigh-vacuum system is a seal capable of isolating a test chamber from its higher pressure surroundings.

Two of the most common vacuum seals now in use are the elastomer O-ring seal and the metallic shear seal. The former has the problem of outgassing and gas permeation; the latter requires a large force per unit seal-length to maintain the sealing action. The search for a seal which would provide minimal virtual and real leak rates in a chamber, without requiring a large force to consummate the seal, led to investigation of a liquid-metal seal.
Document ID
19640018296
Acquisition Source
Goddard Space Flight Center
Document Type
Contribution to a larger work
Authors
J E A John
(Goddard Space Flight Center Greenbelt, Maryland, United States)
D A Akins
(Goddard Space Flight Center Greenbelt, Maryland, United States)
G S Pick
(Goddard Space Flight Center Greenbelt, Maryland, United States)
Date Acquired
August 2, 2013
Publication Date
September 18, 1963
Publication Information
Publication: Final Report of the Goddard Summer Workshop Program in Measurement and Simulation of the Space Environment: June 18 to September 18, 1963
Publisher: Goddard Space Flight Center
Subject Category
Spacecraft Design, Testing and Performance
Metals and Metallic Materials
Meeting Information
Meeting: The Goddard Summer Workshop Program
Location: Greenbelt, MD
Country: US
Start Date: June 18, 1963
End Date: September 18, 1963
Sponsors: Goddard Space Flight Center
Accession Number
64N28210
Distribution Limits
Public
Copyright
Work of the US Gov. Public Use Permitted.
Keywords
SEALANT
LIQUID METAL
ULTRAHIGH VACUUM
Document Inquiry

Available Downloads

There are no available downloads for this record.
No Preview Available