NASA Logo

NTRS

NTRS - NASA Technical Reports Server

Back to Results
Dual-Band Deramp Radar Design for Ocean Current MeasurementsA mission has been proposed to remotely measure ocean surface currents and surface wind velocities. It will provide the highest resolution and repeat time of these measurements to date for ocean current models with scientific and societal applications. A ground-based experimental radar unit is needed for proof of concept. The proposed experiment set up is to mount the radar on an oil rig to imitate satellite data acquisition. This summer, I completed the radar design. The design employs chirp/deramp topology with simultaneous transmit/receive channels. These two properties allow large system bandwidth, extended sample time, close range imaging, and low sampling rate. The radar operates in the Ku and Ka microwave bands, at 13.5 and 35.5 GHz, respectively, with a system bandwidth of 300 MHz. I completed the radar frequency analysis and research on potential components and antenna configurations. Subsequent work is needed to procure components, as well as to build, test, and deploy the radar.
Document ID
20060010231
Acquisition Source
Jet Propulsion Laboratory
Document Type
Abstract
Authors
Haynes, Mark S.
(Michigan Univ. MI, United States)
Date Acquired
August 23, 2013
Publication Date
August 1, 2005
Publication Information
Publication: Summer Student Research Presentations
Subject Category
Communications And Radar
Distribution Limits
Public
Copyright
Work of the US Gov. Public Use Permitted.

Available Downloads

There are no available downloads for this record.
No Preview Available