Laboratory study of efficient add-on treatments for interior noise control in light aircraft

Experimental and theoretical studies of the transmission loss (TL) of 1.15 x 1.46 m flat stiffened-skin aluminum panels are described. Panel configurations included panels with no treatment and eight combinations of treatments consisting of a fiberglass-septum layer, a foam-foil damping material, and a plywood double wall trim panel. Measured TL of the untreated panel and the panel with a damping layer showed characteristics of the double mass law: at low frequencies the TL followed a mass law trend associated with the average mass of both skin and stiffness, while at higher frequencies the TL followed a mass law trend associated with skin mass only. A comparison of TL for panels treated with a damping layer, a fiberglass layer, or a trim panel showed that the effects of damping are frequency dependent with some performing better below 500 Hz and others performing better above 500 Hz. Treatment combinations showed that two treatments with the same mass could have TL values different by about 10 dB, while other combinations having weights different by a factor of two could have TL values within a few dB over most of the frequency range. The highest TL values (50 dB at 1000 Hz) were obtained with a treatment consisting of a fiberglass layer, a trim panel, and damping layers on both the stiffened panel and the trim panel.