NASA Logo

NTRS

NTRS - NASA Technical Reports Server

Back to Results
Burn propagation rates of metals and alloys in gaseous oxygenThe average burn rates of several metals and alloys were determined at oxygen pressures between 3.45 and 68.91 MPa (500 and 10,000 psig) and ambient temperature. Several materials were tested at elevated sample temperatures. The test materials were fabricated into solid cylindrical rods and mounted vertically in the test chamber. A magnesium igniter was positioned at the bottom end of each test specimen to promote upward burn propagations. Nickel 200 and copper 102 could not be ignited at all oxygen pressures tested whereas Monel 400 appeared to ignite but quickly self-extinguished. The other materials tested burned the entire length of the test sample. Aluminum 6061 exhibited the fastest burn propagation rate. Inconel 718 burned slower than aluminum but faster than the stainless steels (types 304 and 316). Increasing oxygen pressure generally increased the burn propagation rate of the materials. Increasing the ambient temperature of the test specimens for several materials to approximately 850 K (1070 F) had little effect upon the ignition or burn properties of nickel 200 or Monel 400. Type 316 stainless steel exhibited an increase in its burn propagation rate at this higher temperature.
Document ID
19870023591
Acquisition Source
Legacy CDMS
Document Type
Conference Paper
Authors
Benz, F. J.
(NASA Johnson Space Center Las Cruces, NM, United States)
Shaw, R. C.
(NASA White Sands Test Facility NM, United States)
Homa, J. M.
(Lockheed Engineering and Management Services Co., Inc. Las Cruces, NM, United States)
Date Acquired
August 13, 2013
Publication Date
January 1, 1986
Subject Category
Metallic Materials
Accession Number
87A10865
Distribution Limits
Public
Copyright
Other

Available Downloads

There are no available downloads for this record.
No Preview Available