Modes 1 and 4 Testing of an Axisymmetric GTX RBCC Engine

Under sponsorship of the NASA Glenn Research Center (NASA GRC), the Johns Hopkins University Applied Physics Laboratory (JHU/APL) designed and built a five-inch diameter, Rocket-Based Combined Cycle (RBCC) engine to investigate mode 1 and mode 4 performance. This engine was designed so that engine area and length ratios were similar to the NASA GRC GTX engine. Unlike the GTX semi-circular engine design, the APL engine is completely axisymmetric. For this design, a traditional rocket thruster was installed inside of the scramjet flowpath, along the engine centerline. A three part test series is currently underway to determine mode 1 and mode 4 engine performance and compare those results to the rocket thruster operating by itself. All tests are to be conducted in APL's Cell 2 Freejet Engine Facility. Testing of the rocket thruster alone has been accomplished and its performance determined (average Isp efficiency = 90%). Mode 1 (air-augmented rocket) testing is to be conducted at various chamber pressure-to-ambient pressure ratios with the engine inlet fully open. Mode 4 (vacuum rocket) testing is to be conducted with chamber pressure-to-ambient pressure ratios greater than 600 with the inlet fully closed to simulate high-altitude flight conditions. The engine is currently installed in Cell 2 and awaiting testing. This paper discusses the engine design and details the results of the rocket-only testing. Comparisons to previous tests and projected mode 1 and mode 4 test conditions are also discussed.