A new basis for the determination of fracture toughness

A study is presented which shows that the growth of the plastic zone and the constraint in a compact tension specimen depends significantly on specimen width. The analysis permits the estimation of the contribution of the growth of plastic zone to the deviation from linearity. The contribution of the crack growth to the deviation from linearity is evaluated from the analysis of a typical R-curve data. A combination of these two analyses enables one to define a very simple procedure for the determination of fracture toughness. The fracture toughness is defined as the stress intensity value at which the crack extension starts. The good agreement between analytical results and experimental KQ and KIC values determined over a wide range of thicknesses, widths, and materials justifies the proposed procedures. The KIC determined according to this procedure is independent of specimen width and such a procedure enhances the range of applicability of the K concept to a wider combination of configurations and materials.