Megaplumes on Venus

The geoid and topography heights of Atla Regio and Beta Regio, both peaks and slopes, appear explicable as steady-state plumes, if non-linear viscosity eta(Tau, epsilon) is taken into account. Strongly constrained by the data are an effective plume depth of about 700 km, with a temperature anomaly thereat of about 30 degrees, leading to more than 400 degrees at the plume head. Also well constrained is the combination Q(eta)/s(sup 4)(sub 0) = (volume flow rate)(viscosity)/(plume radius): about 11 Pa/m/sec. The topographic slopes dh/ds constrain the combination Q/A, where A is the thickness of the spreading layer, since the slope varies inversely with velocity. The geoid slopes dN/ds require enhancement of the deeper flow, as expected from non-linear viscosity. The Beta data are best fit by Q = 500 m(sup 3)/sec and A equals 140 km; the Atla, by Q equals 440 m(exp 3)/sec and A equals 260 km. The dynamic contribution to the topographic slope is minor.