NASA Logo

NTRS

NTRS - NASA Technical Reports Server

Back to Results
Optimal Propellant Maneuver Flight Demonstrations on ISSIn this paper, first ever flight demonstrations of Optimal Propellant Maneuver (OPM), a method of propulsive rotational state transition for spacecraft controlled using thrusters, is presented for the International Space Station (ISS). On August 1, 2012, two ISS reorientations of about 180deg each were performed using OPMs. These maneuvers were in preparation for the same-day launch and rendezvous of a Progress vehicle, also a first for ISS visiting vehicles. The first maneuver used 9.7 kg of propellant, whereas the second used 10.2 kg. Identical maneuvers performed without using OPMs would have used approximately 151.1kg and 150.9kg respectively. The OPM method is to use a pre-planned attitude command trajectory to accomplish a rotational state transition. The trajectory is designed to take advantage of the complete nonlinear system dynamics. The trajectory choice directly influences the cost of the maneuver, in this case, propellant. For example, while an eigenaxis maneuver is kinematically the shortest path between two orientations, following that path requires overcoming the nonlinear system dynamics, thereby increasing the cost of the maneuver. The eigenaxis path is used for ISS maneuvers using thrusters. By considering a longer angular path, the path dependence of the system dynamics can be exploited to reduce the cost. The benefits of OPM for the ISS include not only reduced lifetime propellant use, but also reduced loads, erosion, and contamination from thrusters due to fewer firings. Another advantage of the OPM is that it does not require ISS flight software modifications since it is a set of commands tailored to the specific attitude control architecture. The OPM takes advantage of the existing ISS control system architecture for propulsive rotation called USTO control mode1. USTO was originally developed to provide ISS Orbiter stack attitude control capability for a contingency tile-repair scenario, where the Orbiter is maneuvered using its robotic manipulator relative to the ISS. Since 2005 USTO has been used for nominal ISS operations.
Document ID
20130014033
Acquisition Source
Johnson Space Center
Document Type
Conference Paper
Authors
Bhatt, Sagar
(Draper (Charles Stark) Lab., Inc. Houston, TX, United States)
Bedrossian, Nazareth
(Halliburton Houston, TX, United States)
Longacre, Kenneth
(United Space Alliance Houston, TX, United States)
Nguyen, Louis
(NASA Johnson Space Center Houston, TX, United States)
Date Acquired
August 27, 2013
Publication Date
August 19, 2013
Subject Category
Spacecraft Design, Testing And Performance
Report/Patent Number
JSC-CN-28682
Meeting Information
Meeting: AIAA Guidance, Navigation, and Control Conference 2013
Location: Boston, MA
Country: United States
Start Date: August 19, 2013
End Date: August 22, 2013
Sponsors: American Inst. of Aeronautics and Astronautics
Funding Number(s)
CONTRACT_GRANT: NNJ06HC37C
Distribution Limits
Public
Copyright
Public Use Permitted.
No Preview Available