Descent capability of two-propeller tilt-wing configurations

The wing stall problem encountered with tilt-wing V/STOL designs during low-powered descent flight conditions has led to buffeting which adversely affects both performance and handling qualities. The results of tests conducted in the Langley full-scale wind tunnel with a large semi­span model of a two-propeller tilt-wing configuration have indicated that three important factors provide substantial improvement in in the wing stall characteristics with consequent improvement in descent capability: down­-at-center propeller rotation resulted in delayed inboard stalling and pro­vided far better descent capability than the up-at-center rotation, moderate lowering of the propeller position relative to the wing chord provided further improvement in descent capability, and some flap deflec­tion was absolutely essential in order to have any descent capability for low-powered flight conditions. Use of all three factors should provide good descent capability even without the complexity of other sophisticated stall control devices.