A millimeter wave mixer

The mixer consists of a small metallic wafer, in which are embedded the semiconductor diodes, the waveguide mount is used to couple the diode wafer to the signal circuit, an RF tuning element, and a 3 mm coaxial connector for the IF output terminal. The cross-sectional dimension is that of the waveguide flange (19 mm x 19 mm, 0.75" x 0.75"), the overall length is nominally 25 mm (1.0 inch). This component is to be used as a single-ended RF mixer with four replacement mixer diodes, operating in the three millimeter wavelength band.