Skylab S192 data evaluation: Comparisons with ERTS-1 results

The author has identified the following significant results. The Skylab S192 data was evaluated by: (1) comparing the classification results using S192 and ERTS-1 data over the Holt County, Nebraska agricultural study area, and (2) investigating the impact of signal-to-noise ratio on classification accuracies using registered S192 and ERTS-1 data. Results indicate: (1) The classification accuracy obtained on S192 data using its best subset of four bands can be expected to be as high as that on ERTS-1 data. (2) When a subset of four S192 bands that are spectrally similar to the ERTS-1 bands was used for classification, an obvious deterioration in the classification accuracy was observed with respect to the ERTS-1 results. (3) The thermal bands 13 and 14 as well as the near IR bands were found to be relatively important in the classification of agricultural data. Although bands 11 and 12 were highly correlated, both were invariably included in the best subsets of the band sizes, four and beyond, according to the divergence criterion. (4) The differentiation of corn from popcorn was difficult on both S192 and ERTS-1 data acquired at an early summer date. (5) The results on both sets of data indicate that it was relatively easy to differentiate grass from any other class.