Film type SO-168 radiation study

Investigations were performed to determine optimum exposure and processing procedures necessary to partially offset the effect of radiation to which film type SO-168 will be exposed during the Skylab Mission. This task became necessary when it was determined that original predictions of 2 to 3 RADS of radiation to which the film will be exposed were too low, and that levels as high as 3.5 to 4.0 RADS may be incurred, thus reducing image quality below an acceptable level. Tests results show that forced processing of type SO-168 film tended to reduce the density range to an unusable level, and that processing to a lower ASA value would provide greater image quality for the user.