An interdisciplinary analysis of Colorado Rocky Mountain environments using ADP techniques

The author has identified the following significant results. Good ecological, classification accuracy (90-95%) can be achieved in areas of rugged relief on a regional basis for Level 1 cover types (coniferous forest, deciduous forest, grassland, cropland, bare rock and soil, and water) using computer-aided analysis techniques on ERTS/MSS data. Cost comparisons showed that a Level 1 cover type map and a table of areal estimates could be obtained for the 443,000 hectare San Juan Mt. test site for less than 0.1 cent per acre, whereas photointerpretation techniques would cost more than 0.4 cent per acre. Results of snow cover mapping have conclusively proven that the areal extent of snow in mountainous terrain can be rapidly and economically mapped by using ERTS/MSS data and computer-aided analysis techniques. A distinct relationship between elevation and time of freeze or thaw was observed, during mountain lake mapping. Basic lithologic units such as igneous, sedimentary, and unconsolidated rock materials were successfully identified. Geomorphic form, which is exhibited through spatial and textual data, can only be inferred from ERTS data. Data collection platform systems can be utilized to produce satisfactory data from extremely inaccessible locations that encounter very adverse weather conditions, as indicated by results obtained from a DCP located at 3,536 meters elevation that encountered minimum temperatures of -25.5 C and wind speeds of up to 40.9m/sec (91 mph), but which still performed very reliably.