NASA Logo

NTRS

NTRS - NASA Technical Reports Server

Press Enter or click the Search button to begin your search.

Back to Results
Instruction manual, optical effects module electronic controller and processor, model OEMCPThe OEM-1 electronic module is discussed; it is comprised of four subsystems: the signal processing and display; the stepper motor controls; the chopper controls; and the dc-dc invertor. The OEM-1 module controls the sample wheel so that the relative transmittance of the samples can be compared to the clear aperture position. The 3-1/2 digit digital voltmeter displays the clear aperture signal level as well as the ratio of the remaining sample positions relative to the clear aperture position. The sample wheel position is decoded so that the signals and ratios can be correlated to the data. The OEM is automatically reset to the I sub o on initial turn-on and can be reset to the '0' position by actuating a front panel switch. The sample wheel can be interrupted to change samples or induce a longer integration time if desired by a front panel command. Integration times from 1 - 50 seconds are provided at the front panel, and BCD data for external interfacing is provided.
Document ID
19760008289
Acquisition Source
Legacy CDMS
Document Type
Contractor Report (CR)
Date Acquired
September 3, 2013
Publication Date
November 14, 1975
Subject Category
Electronics And Electrical Engineering
Report/Patent Number
REPT-1054-303
NASA-CR-144125
Report Number: REPT-1054-303
Report Number: NASA-CR-144125
Accession Number
76N15377
Funding Number(s)
CONTRACT_GRANT: NAS8-31334
Distribution Limits
Public
Copyright
Work of the US Gov. Public Use Permitted.
No Preview Available