An investigation of supersonic aeroelastic characteristics of oblique winged aircraft

Two formulations of the oblique wing flutter problem are presented: one formulation allows wing bending deformations and the rigid body roll degree of freedom while the second formulation includes bending-torsional deformation and roll degrees of freedom. Flutter is found to occur in two basic modes. The first mode is associated with bending-roll coupling and occurs at low reduced frequency values. The other instability mode is primarily one of classical bending-torsion with negligible roll coupling; this mode occurs at much higher reduced frequencies. The occurrence of bending-roll coupling mode leads to lower flutter speeds while the bending-torsion mode is associated with higher flutter speeds. The ratio of the wing mass moment of inertial in roll to the fuselage moment of inertia evidently plays a major role in the determination of which of the two instabilities is critical.