Effect of swirling flow on augmentor performance, phase 2

A test program has been conducted with an augmentor that employed swirling flow as a means of promoting rapid flame propagation. The program measured the trajectory and dispersion of JP-5-type kerosene sprayed into a strongly swirling flowfield. Using the data obtained, a set of sprayrings was designed and evaluated in the augmentor at conditions simulating those typical of augmented turbojet engines. At the inlet test temperature of 649 C the swirling flowfield had no effect on the radial position of the fuel spray. The augmentor demonstrated combustion efficiencies greater than 95% over most of the operating range, which extended from an equivalence ratio of 0.2 to over 1.0.