Large Deployable Antenna Shuttle ExperimentAn experiment designed to use the Space Shuttle in tests of the mechanical and electrical properties of spaceborne deployable antennas under zero-gravity conditions is outlined. Space-erectable 20-meter diameter phased arrays or reflector/feed systems, and self-deploying mechanisms, are to be tested. Reflector surface integrity will be tested by an AM laser technique, and electrical behavior will be tested by a spin-stabilized RF beacon injected into orbit prior to unfurlment of the antenna. Focusing and gain measurements, static pattern measurements, dynamic RF gain measurements, and measurements of cross-polarized signals will be conducted, and the reflector will be illuminated by separate feeds for the S-, X-, and K-bands. Mechanical features of the mesh-wrapped rib furlable antenna design are described.
Document ID
19760029923
Acquisition Source
Legacy CDMS
Document Type
Conference Paper
Authors
Freeland, R. E. (Jet Propulsion Lab., California Inst. of Tech. Pasadena, CA, United States)
Smith, J. G. (Jet Propulsion Lab., California Inst. of Tech. Pasadena, CA, United States)
Springett, J. C. (Jet Propulsion Lab., California Inst. of Tech. Pasadena, CA, United States)
Woo, K. E. (California Institute of Technology, Jet Propulsion Laboratory, Pasadena Calif., United States)
Date Acquired
August 8, 2013
Publication Date
August 1, 1975
Subject Category
Spacecraft Design, Testing And Performance
Report/Patent Number
AAS PAPER 75-253Report Number: AAS PAPER 75-253
Meeting Information
Meeting: Meeting on Space Shuttle Missions of the 80''s