Leeward heat transfer experiments on the shuttle orbiter fuselage

A recent study by Mruk et al. (1975) of convective heat transfer on the leeward surface of a space shuttle orbiter fuselage configuration has yielded experimental data on a fuselage-wing geometry and a bare fuselage (without wings). The present paper summarizes that portion of the investigation related to the bare fuselage tests in which data were obtained for an angle of attack of 90 deg so as to produce nominal planar flow. In addition, some supplementary data were obtained at an angle of attack of 30 deg. The bare fuselage geometry, when immersed in a nearly normal approaching flow, behaves as a cylinder of noncircular cross section and moderate aspect ratio. The data presented were obtained with air as the test gas in a 96-in. hypersonic shock tunnel over a specified range of test conditions. The test program included three values of windward surface temperature and two values of leeward section temperature. Leeward convection is characterized by two values of Stanton number; one for the attached flow just prior to separation and the other for the recirculating zone.