Computation of transonic boattail flow with separation

The relaxation procedure of South and Jameson for the full potential transonic flow equation was coupled to a modified Reshotko-Tucker integral boundary-layer technique with an empirical model for separated flow. The viscous and inviscid flows were solved iteratively until convergence was obtained. This iterative method was then applied to the subsonic and transonic flow over a series of axisymmetric circular-arc boattails with solid jet plume simulators. Comparisons of theoretical and experimental surface pressures and boattail drag are presented over a free-stream Mach numbers below 0.90. The qualitative variation of boattail drag with free-stream Mach number and boattail angle well into the region of transonic drag rise was correctly predicted; however, the absolute drag levels were significantly underpredicted. For separated flows, the empirical discriminating streamline model gives good results up to a free-stream Mach number of about 0.90 and allows reasonable predictions for shock-induced separation if the proper separation location and separation turning angle are known.