Study of the use of a nonlinear, rate-limited filter on pilot control signals

The use of a nonlinear, rate limited filter for rejecting the remnant (noise) in a pilot's control signal was studied through both an analytical study using pilot models and a simulation study using experienced test pilots. The nonlinear filter was compared with a linear filter and with no filter for both attitude and altitude control tasks. The results show that the nonlinear filter does promote rapid, steady maneuvering better than either the linear filter or the no filter condition. In addition, if the rate limit in the nonlinear filter is set so that it is too restrictive, a pilot induced unstable altitude oscillation can result.