Free jet phenomena in a 90 degree-sharp edge inlet geometry

Under certain conditions, inlets with a sharp edge or geometric corner were shown to exhibit sufficiently strong separation effects to permit the working fluid to flow through the duct as if it were a free jet. Mass limiting flow data and associated pressure profiles for tubes of 53, 64, 73, and 105 length/diameter with a 90 deg sharp edge or orifice type inlet were taken and compared to Borda type inlet data to determine bounds of the free jet phenomena. For smooth tubes the limits appear to be one dimensional and dependent only on inlet stagnation conditions. Similar free jet effects were found for fluid hydrogen indicating that fluid jetting may common to all fluids flowing through 90 deg sharp edge inlet geometries.