Anti-misting additives for jet fuels

The ignition characteristics of sprays, created by wind shear action, of Jet-A fuel containing polyisobutylene additives wee examined over ranges of air velocities from 45 to 90 m/s and of fuel/air mass ratios of 0.20 to 8.0. Ignition was by calibrated sparks of energies up to about 0.5 J and by a butane/oxygen flame at 165 J/s. The polymeric additives studied included the grades L80, L160, and L200 from Exxon Chemical and B200 and B230 from BASF. The ignition suppression ability of the additives, as well as their observed anti-misting (AM) behavior, ranked exactly as their molecular weights (viscosity average, M sub v) with 400-500 ppm of L80 (M sub v = 0.68 x 1,000,000) being required to suppress ignition of a spray at 51 m/s, 1.8 fuel/air mass ratio, by a 0.55 J spark while only 10 ppm of B230 (M sub v = 7.37 x 1,000,000) was required for the same conditions. The additive concentrations (L160) required for ignition suppression increased with increasing air velocity and with increasing fuel/air ratio.