Experimental implementation of parameter adaptive control on a free-free beam

A method for identifying modal parameters has been integrated with a modal control scheme and implemented on an experimental beam at the NASA Langley Research Center. This work is the culmination of several studies to develop adaptive control schemes for large flexible spacecraft. The identification scheme is an equation-error technique which generates modal frequency and damping estimates on-line from a set of distributed displacement measurements. The control law is a modal pole placement technique with the objective of vibration suppression. Integration of the identification and control schemes is achieved through a series of tests which validate the identified parameters before they are used for control gain updating. Results using a low order controller show that control gains can be updated in real time based on the validated parameters to improve the performance of the closed loop system. Important factors in the implementation are the test criterion and the a priori assumption of mode shapes.