A validation study of the Spark Navier Stokes code for nonreacting scramjet combustor flowfields

A detailed study of Mach 2 flow over a rearward facing step and staged normal injection behind a rearward facing step into a Mach 2 mainflow has been performed using the Spark three-dimensional Navier-Stokes code. Very good overall agreement was observed for the flowfield without normal injection. The notable exceptions were the velocity for which the measured values showed more scatter and the temperature at the wall for which the value measured was below the adiabatic wall temperature. Faithful representation of the incoming boundary layer was found to be important in achieving good agreement. For the staged jet case, the calculated and measured flow quantities showed reasonably good agreement, with two significant discrepancies: the calculated jet trajectory is inclined more to the vertical then the measured one, and the measured temperatures downstream of the jets are lower than the computed ones. Possible reasons for the discrepancies are suggested.