NASA Logo

NTRS

NTRS - NASA Technical Reports Server

Press Enter or click the Search button to begin your search.

Back to Results
Characterization of Iridium Coated Rhenium Used in High-Temperature, Radiation-Cooled Rocket ThrustersMaterials used for radiation-cooled rocket thrusters must be capable of surviving under extreme conditions of high-temperatures and oxidizing environments. While combustion efficiency is optimized at high temperatures, many refractory metals are unsuitable for thruster applications due to rapid material loss from the formation of volatile oxides. This process occurs during thruster operation by reaction of the combustion products with the material surface. Aerojet Technical Systems has developed a thruster cone chamber constructed of Re coated with Ir on the inside surface where exposure to the rocket exhaust occurs. Re maintains its structural integrity at high temperature and the Ir coating is applied as an oxidation barrier. Ir also forms volatile oxide species (IrO2 and IrO3) but at a considerably slower rate than Re. In order to understand the performance limits of Ir-coated Re thrusters, we are investigating the interdiffusion and oxidation kinetics of Ir/Re. The formation of iridium and rhenium oxides has been monitored in situ by Raman spectroscopy during high temperature exposure to oxygen. For pure Ir, the growth of oxide films as thin as approximately 200 A could be easily detected and the formation of IrO2 was observed at temperatures as low as 600 C. Ir/Re diffusion test specimens were prepared by magnetron sputtering of Ir on Re substrates. Concentration profiles were determined by sputter Auger depth profiles of the heat treated specimens. Significant interdiffusion was observed at temperatures as low as 1000 C. Measurements of the activation energy suggest that below 1350 C, the dominant diffusion path is along defects, most likely grain boundaries, rather than bulk diffusion through the grains. The phases that form during interdiffusion have been examined by x ray diffraction. Analysis of heated test specimens indicates that the Ir-Re reaction produces a solid solution phase of Ir dissolved in the HCP structure of Re.
Document ID
19910014954
Acquisition Source
Legacy CDMS
Document Type
Conference Paper
Authors
Stulen, R. H.
(Sandia National Labs. Livermore, CA, United States)
Boehme, D. R.
(Sandia National Labs. Livermore, CA, United States)
Clift, W. M.
(Sandia National Labs. Livermore, CA, United States)
McCarty, K. F.
(Sandia National Labs. Livermore, CA, United States)
Date Acquired
September 6, 2013
Publication Date
October 1, 1990
Publication Information
Publication: Johns Hopkins Univ., The 1990 JANNAF Propulsion Meeting, Volume 2
Subject Category
Spacecraft Propulsion And Power
Accession Number
91N24267
Funding Number(s)
CONTRACT_GRANT: NAS3-25646
Distribution Limits
Public
Copyright
Work of the US Gov. Public Use Permitted.
No Preview Available