NASA Logo

NTRS

NTRS - NASA Technical Reports Server

Press Enter or click the Search button to begin your search.

Back to Results
A unified viscous theory of lift and drag of 2-D thin airfoils and 3-D thin wingsA unified viscous theory of 2-D thin airfoils and 3-D thin wings is developed with numerical examples. The viscous theory of the load distribution is unique and tends to the classical inviscid result with Kutta condition in the high Reynolds number limit. A new theory of 2-D section induced drag is introduced with specific applications to three cases of interest: (1) constant angle of attack; (2) parabolic camber; and (3) a flapped airfoil. The first case is also extended to a profiled leading edge foil. The well-known drag due to absence of leading edge suction is derived from the viscous theory. It is independent of Reynolds number for zero thickness and varies inversely with the square root of the Reynolds number based on the leading edge radius for profiled sections. The role of turbulence in the section induced drag problem is discussed. A theory of minimum section induced drag is derived and applied. For low Reynolds number the minimum drag load tends to the constant angle of attack solution and for high Reynolds number to an approximation of the parabolic camber solution. The parabolic camber section induced drag is about 4 percent greater than the ideal minimum at high Reynolds number. Two new concepts, the viscous induced drag angle and the viscous induced separation potential are introduced. The separation potential is calculated for three 2-D cases and for a 3-D rectangular wing. The potential is calculated with input from a standard doublet lattice wing code without recourse to any boundary layer calculations. Separation is indicated in regions where it is observed experimentally. The classical induced drag is recovered in the 3-D high Reynolds number limit with an additional contribution that is Reynold number dependent. The 3-D viscous theory of minimum induced drag yields an equation for the optimal spanwise and chordwise load distribution. The design of optimal wing tip planforms and camber distributions is possible with the viscous 3-D wing theory.
Document ID
19920004779
Acquisition Source
Legacy CDMS
Document Type
Contractor Report (CR)
Authors
Yates, John E.
(Titan Systems, Inc. Princeton, NJ, United States)
Date Acquired
September 6, 2013
Publication Date
December 1, 1991
Publication Information
Publisher: NASA. Langley
Subject Category
Aerodynamics
Report/Patent Number
NAS 1.26:4414
NASA-CR-4414
Report Number: NAS 1.26:4414
Report Number: NASA-CR-4414
Accession Number
92N13997
Funding Number(s)
CONTRACT_GRANT: NASA ORDER L-74809-C
PROJECT: RTOP 505-59-54-01
Distribution Limits
Public
Copyright
Work of the US Gov. Public Use Permitted.
No Preview Available