A He-3-gap heat switch for use below 2 K in zero GWe have designed and tested a compact heat switch that has a simple design and a very large ON/OFF ratio. The design uses concentric cylinders of copper that can be fabricated with higher precision and with thinner web thickness than other designs. It is assembled with a technique that carefully controls the narrow gap between adjacent segments. These features allow a very large surface area for conduction to be fitted into a small volume. The conduction medium is liquid or gaseous He-3 which is put into or taken out of the switch by a small nearby charcoal pump in order to avoid an external mechanical pump and a long pump line. Measurements of its performance down to 1 K show an ON/OFF conduction ratio of about 4000.
Document ID
19930064614
Acquisition Source
Legacy CDMS
Document Type
Conference Paper
Authors
Roach, Pat R. (NASA Ames Research Center Moffett Field, CA, United States)
Helvensteijn, Ben P. M. (Sterling Federal Systems, Inc. Palo Alto, CA, United States)
Date Acquired
August 16, 2013
Publication Date
January 1, 1991
Publication Information
Publication: In: Advances in cryogenic engineering. Vol. 37B - Proceedings of the 1991 Cryogenic Engineering Conference, Univ. of Alabama, Huntsville, June 11-14, 1991 (A93-48578 20-37)
Publisher: Plenum Press
Subject Category
Engineering (General)
Accession Number
93A48611
Distribution Limits
Public
Copyright
Other
Available Downloads
There are no available downloads for this record.
Related Records
IDRelationTitle19930064581Collected WorksAdvances in cryogenic engineering. Vols. 37A & 37B - Proceedings of the 1991 Cryogenic Engineering Conference, Univ. of Alabama, Huntsville, June 11-14, 1991