Some Experimental Studies of Panel Flutter at Mach Number 1.3

Experimental studies of panel flutter using thin metal plates were conducted at a Mach number of 1.3 to verify its existence and to study the effects of some structural parameters on the flutter characteristics. The effects of tensile forces and buckling were studied on panels clamped front and rear, in addition to initially buckled panels clamped on all four edges. Panel flutter was obtained under controlled laboratory conditions and it was found that tensile forces, shortening the panels, and increasing the bending stiffness were effective means for eliminating flutter. Buckled panels were more susceptible to flutter than unbuckled panels. No apparent systematic trends in the flutter modes or frequencies could be observed.