NASA Logo

NTRS

NTRS - NASA Technical Reports Server

Press Enter or click the Search button to begin your search.

Back to Results
Dynamics of the inlet system of a four-stroke engineTests were run on a single-cylinder and a multicylinder four-stroke engine in order to determine the effect of the dynamics of the inlet system upon indicated mean effective pressure. Tests on the single-cylinder engine were made at various speeds, inlet valve timings, and inlet pipe lengths. These tests indicated that the indicated mean effective pressure could be raised considerably at any one speed by the use of a suitably long inlet pipe. Tests at other speeds with this length of pipe showed higher indicated mean effective pressure than with a very short pipe, although not so high as could be obtained with the pipe length adjusted for each speed. A general relation was discovered between optimum time of inlet valve closing and pipe length; namely, that longer pipes require later inlet valve closing in order to be fully effective. Tests were also made on three cylinders connected to a single pipe. With this arrangement, increased volumetric efficiency at low speed was obtainable by using a long pipe, but only with a sacrifice of volumetric efficiency at high speed. Volumetric efficiency at high speed was progressively lower as the pipe length was increased.
Document ID
19930084998
Acquisition Source
Legacy CDMS
Document Type
Other
Authors
Boden, R H
(Massachusetts Institute of Technology)
Schecter, Harry
(Massachusetts Institute of Technology)
Date Acquired
September 6, 2013
Publication Date
January 1, 1944
Report/Patent Number
NACA-TN-935
Report Number: NACA-TN-935
Accession Number
93R14288
Funding Number(s)
CONTRACT_GRANT: NACA Contract NAS-371
Distribution Limits
Public
Copyright
Work of the US Gov. Public Use Permitted.
Keywords
ENGINES-CHRYSLER
ENGINES, TEST-NACA UNIVERSAL
VALVES-TIMING
ENGINES, FOUR-CYCLE-PRESSURE
ENGINES-VOLUMETRIC EFFICIENCY
INTAKE PIPES-LENGTH & DIAMETER
BIBLIOGRAPHY-ENGINES
No Preview Available