NASA Logo

NTRS

NTRS - NASA Technical Reports Server

Press Enter or click the Search button to begin your search.

Back to Results
Low-speed Investigation of a Semisubmerged Air Scoop with and Without Boundary-layer SuctionA preliminary low-speed investigation has been made of an air scoop submerged one-half the inlet height in a depression on the surface of a simulated fuselage. Boundary-layer suction was used on the steep approach ramp to improve the internal flow. A 6-degree-included-angle diffuser with an area ratio of 1.9:1 was located behind the inlet in the model. Most of the tests were conducted with an initial turbulent boundary layer believed to approximate that which would occur on the forward part of a fuselage. A few tests were made with a boundary layer about 2.5 times the thickness of the original boundary layer to determine the effect of moving the inlet further rearward on the fuselage. The effects of suction-slot location and slot width were determined and a few tests with area suction were made. The maximum quantity of suction flow was about 15 percent of the inlet flow at an inlet-velocity ratio of 0.6.
Document ID
19930093829
Acquisition Source
Legacy CDMS
Document Type
Other
Authors
Pierpont, P Kenneth
Howell, Robert R
Date Acquired
August 16, 2013
Publication Date
February 23, 1951
Report/Patent Number
NACA-RM-L50H15
Report Number: NACA-RM-L50H15
Accession Number
93R23153
Distribution Limits
Public
Copyright
Work of the US Gov. Public Use Permitted.
No Preview Available