NASA Logo

NTRS

NTRS - NASA Technical Reports Server

Press Enter or click the Search button to begin your search.

Back to Results
LUTE telescope structural designThe major objective of the Lunar Ultraviolet Transit Experiment (LUTE) Telescope Structural Design Study was to investigate the feasibility of designing an ultralightweight 1-m aperture system within optical performance requirements and mass budget constraints. This study uses the results from our previous studies on LUTE as a basis for further developing the LUTE structural architecture. After summarizing our results in Section 2, Section 3 begins with the overall logic we used to determine which telescope 'structural form' should be adopted for further analysis and weight estimates. Specific telescope component analysis showing calculated fundamental frequencies and how they compare with our derived requirements are included. 'First-order' component stress analyses to ensure telescope optical and structural component (i.e. mirrors & main bulkhead) weights are realistic are presented. Layouts of both the primary and tertiary mirrors showing dimensions that are consistent with both our weight and frequency calculations also form part of Section 3. Section 4 presents our calculated values for the predicted thermally induced primary-to-secondary mirror despace motion due to the large temperature range over which LUTE must operate. Two different telescope design approaches (one which utilizes fused quartz metering rods and one which assumes the entire telescope is fabricated from beryllium) are considered in this analysis. We bound the secondary mirror focus mechanism range (in despace) based on these two telescope configurations. In Section 5 we show our overall design of the UVTA (Ultraviolet Telescope Assembly) via an 'exploded view' of the sub-system. The 'exploded view' is annotated to help aid in the understanding of each sub-assembly. We also include a two view layout of the UVTA from which telescope and telescope component dimensions can be measured. We conclude our study with a set of recommendations not only with respect to the LUTE structural architecture but also on other topics related to the overall feasibility of the LUTE telescope sub-system.
Document ID
19940008975
Acquisition Source
Legacy CDMS
Document Type
Contractor Report (CR)
Authors
Ruthven, Gregory
(Hughes Danbury Optical Systems Inc., CT, United States)
Date Acquired
September 6, 2013
Publication Date
May 1, 1993
Subject Category
Astronomy
Report/Patent Number
NAS 1.26:192594
PR-D15-0015
NASA-CR-192594
Report Number: NAS 1.26:192594
Report Number: PR-D15-0015
Report Number: NASA-CR-192594
Accession Number
94N13448
Funding Number(s)
CONTRACT_GRANT: NASA ORDER H-19671-D
Distribution Limits
Public
Copyright
Work of the US Gov. Public Use Permitted.
No Preview Available