Programmable display pushbuttons on the Space Station's telerobot control panel

The Man-Systems Telerobotics Laboratory at NASA's Johnson Space Center and supported by Lockheed, is working to ensure that the Flight Telerobotic Servicer (FTS) to be used on the Space Shuttle (Orbiter) and the Space Station has a well designed user interface from a Human Factors perspective. The FTS, which is a project led by NASA's Goddard Space Flight Center, will be a telerobot used for Space Station construction, maintenance, and satellite repair. It will be directly controlled from workstations on the Orbiter and the Space Station and monitored from a ground workstation. The FTS will eventually evolve into a more autonomous system, but in the short-term the system will be manually operated (teleoperated) for many tasks. This emphasizes the importance of the human/telerobot interface on this system. This phase of the FTS workstation evaluation covers a preliminary study of programmable display pushbuttons (PDP's). The PDP is constructed of a matrix of directly addressable electroluminescent (EL) pixels which can be used to form dot-matrix characters. PDP's can be used to display more than one message and to control more than one function. Since the PDP's have these features, then a single PDP may possibly replace the use of many single-function pushbuttons, rotary switches, and toggle switches, thus using less panel space. It is of interest to determine if PDP's can be used to adequately perform complex hierarchically structured task sequences. The objective of this investigation was to compare the performance of experienced and inexperienced Remote Manipulator System (RMS) operators while performing an RMS like task on simulated PDP and non-PDP computer prototypes so that guidelines governing the use of programmable display pushbuttons on the FTS workstation could be created. The functionality of the RMS on the Orbiter was used as a model for this evaluation since the functionality of the FTS at the time of this writing has not been solidified.