NASA Logo

NTRS

NTRS - NASA Technical Reports Server

Back to Results
A small satellite design for deep space network testing and trainingWith the continuing exploration of the Solar System and the reemphasis on Earth focused missions, the need for faster data transmission rates has grown. Ka-band could allow a higher data delivery rate over the current X-band, however the adverse effects of the Earth's atmosphere on Ka are as yet unknown. The Deep Space Network and Jet Propulsion Lab have proposed to launch a small satellite that would simultaneously transmit X and Ka signals to test the viability of switching to Ka-band. The Mockingbird Design Team at the University of Texas at Austin applied small satellite design principles to achieve this objective. The Mockingbird design, named BATSAT, incorporates simple, low-cost systems designed for university production and testing. The BATSAT satellite is a 0.64 m diameter, spherical panel led satellite, mounted with solar cells and omni-directional antennae. The antennae configuration negates the need for active attitude control or spin stabilization. The space-frame truss structure was designed for 11 g launch loads while allowing for easy construction and solar-panel mounting. The communication system transmits at 1 mW by carrying the required Ka and X-band transmitters, as well as an S band transmitter used for DSN training. The power system provides the 8.6 W maximum power requirements via silicon solar arrays and nickel-cadmium batteries. The BATSAT satellite will be lofted into an 1163 km, 70 deg orbit by the Pegasus launch system. This orbit fulfills DSN dish slew rate requirements while keeping the satellite out of the heaviest regions of the Van Allen radiation belts. Each of the three DSN stations capable of receiving Ka-band (Goldstone, Canberra, and Madrid) will have an average of 85 minutes of view-time per day over the satellites ten year design life. Mockingbird Designs hopes that its small satellite design will not only be applicable to this specific mission scenario, but that it could easily be modified for instrument capability for university, government, and/or commercial research.
Document ID
19940020229
Acquisition Source
Legacy CDMS
Document Type
Contractor Report (CR)
Authors
Mcwilliams, Dennis
(Texas Univ. Austin, TX, United States)
Slatton, Clint
(Texas Univ. Austin, TX, United States)
Norman, Cassidy
(Texas Univ. Austin, TX, United States)
Araiza, Joe
(Texas Univ. Austin, TX, United States)
Jones, Jason
(Texas Univ. Austin, TX, United States)
Tedesco, Mark
(Texas Univ. Austin, TX, United States)
Wortman, Michael
(Texas Univ. Austin, TX, United States)
Opiela, John
(Texas Univ. Austin, TX, United States)
Lett, Pat
(Texas Univ. Austin, TX, United States)
Clavenna, Michael
(Texas Univ. Austin, TX, United States)
Date Acquired
September 6, 2013
Publication Date
May 8, 1993
Subject Category
Spacecraft Design, Testing And Performance
Report/Patent Number
NASA-CR-195526
NAS 1.26:195526
Report Number: NASA-CR-195526
Report Number: NAS 1.26:195526
Accession Number
94N24702
Funding Number(s)
CONTRACT_GRANT: NASW-4435
Distribution Limits
Public
Copyright
Work of the US Gov. Public Use Permitted.
No Preview Available