RINGSAT

Radio frequency interference (RFI) presents a serious problem to naval communications. Unauthorized transmissions on the same frequencies that FLTSAT or LEASAT use cause a loss of one or more transponders on a satellite. The problem is not correctable until the emitter is located and turned off, or until it runs off on its own. The present geolocation system cannot deal with the RFI problem adequately. This causes the Navy to lose operational capability and money. The proposed Radio Frequency Interference Navy Geolocation Satellite (RINGSAT) would locate the source of the interference within 3 hours, an outstanding improvement over current equipment. Furthermore, RINGSAT can be built quickly, at minimal cost, and can be used concurrently for other military missions. Currently, geolocation to identify the RFI is done at Naval Space Command. Using single satellite doppler, time delay of arrival, and frequency delay of arrival techniques, it is possible to locate the interfering emitter. However, for the first quarter of fiscal year 1993, about 50 different channels used by the Navy were nonoperational for over 500 hours. Almost 30 percent of the interference occurrences lasted for over 12 hours. In only one quarter of the cases was the interference turned off in less than two_hours either by our detection or on its own.