Long Duration Exposure Facility

The Long Duration Exposure Facility (LDEF) materials were useful for testing technical concepts that needed to be validated for the Cosmic Dust Collector Facility (CDCF) - a large instrument that was under study for inclusion on the upcoming Space Station. As it turned out, CDCF, which was approved at one point as an external payload, was ultimately canceled due to the scaling back of the Space Station capabilities. However, the study of cosmic dust is still a field of great interest for NASA, being the crucial part of at least one experiment that is still being considered for a Discovery mission. The optimum analysis of hypervelocity impacts is thus a continuing NASA concern. Two experiments, AO187-1 and AO187-2 were explicitly designed to measure the flux and composition of dust particles impacting LDEF. The former consisted of flat targets of Au and Al while the second comprised a set of 237 "capture cells" using Ge target plates covered by thin (2.5 microns) metallized plastic foils. The spacecraft maintained a constant orientation with respect to its velocity vector thereby defining leading and trailing edges that faced respectively into and away from the direction of motion. Both AO187-1 and AO187-2 had detectors on both the leading and trailing edges of LDEF. It was expected that interplanetary dust particles would dominate impacts on the trailing edge while the leading edge would be exposed to both cosmic dust and particles of orbital manmade debris. In AO187-1, the compositions of the impactors was determined by SEM-EDS techniques; in AO187-2 a sensitive surface analysis technique - SIMS - was used to determine both elemental and (some) isotopic compositions. In the initial analysis of AO187-2, it was found that SIMS was more sensitive for the analysis of thin impact debris layers than SEM-EDS. The present grant was made to determine if SIMS analysis could also be applied to impacts recorded in the Au surfaces of AO187-1. Success would extend the analysis of AO187-1 and would also contribute important technical information for the design of future cosmic dust space missions. The results obtained with this grant are incorporated in the attached paper presented at the Third LDEF Symposium and are briefly summarized here. In addition, we comment on the potential implications of this work for future research.