Experiment 6: Surface Tension Driven Convection Experiment-2 (STDCE-2)

Results are reported from the Second Surface Tension Driven Convection Experiment (STDCE-2) performed aboard the Second United States Microgravity Laboratory (USML-2), which flew as Space Shuttle mission STS-73 and launched on October 20, 1995. Oscillatory thermocapillary flows were investigated in open cylindrical containers filled with 2 centistokes kinematic viscosity (Pr=27 at 25 C) silicone oil. Two different heating modes were investigated in detail. The main objectives of the experiments were to determine the onset of oscillatory thermocapillary flow under highly reduced buoyancy and gravity conditions and to study the important features of the oscillatory flow. The onset conditions were determined in three different size containers (1.2-, 2-, and 3-cm diameter) and for various free surface shapes (flat and curved). Numerical and scaling analyses were also performed to understand the basic steady flows. The analysis shows that the main flow is viscous-dominated near the onset of oscillations. The onset conditions determined in the present experiments together with our earlier ground-based data show that one could not describe the oscillation phenomenon if the fluid free surface is assumed to be rigid. Therefore, a parameter representing free surface deformation was derived, and the data are shown to be correlated well by that parameter. The oscillation patterns and frequencies are also presented.