NASA Logo

NTRS

NTRS - NASA Technical Reports Server

Press Enter or click the Search button to begin your search.

Back to Results
Test Capabilities and Recent Experiences in the NASA Langley 8-Foot High Temperature TunnelThe NASA Langley 8-Foot High Temperature Tunnel is a combustion-heated hypersonic blowdown-to-atmosphere wind tunnel that provides flight enthalpy simulation for Mach numbers of 4, 5, and 7 through an altitude range from 50,000 to 120,000 feet. The open-.jet test section is 8-ft. in diameter and 12-ft. long. The test section will accommodate large air-breathing hypersonic propulsion systems as well as structural and thermal protection system components. Stable wind tunnel test conditions can be provided for 60 seconds. Additional test capabilities are provided by a radiant heater system used to simulate ascent or entry heating profiles. The test medium is the combustion products of air and methane that are burned in a pressurized combustion chamber. Oxygen is added to the test medium for air-breathing propulsion tests so that the test gas contains 21 percent molar oxygen. The facility was modified extensively in the late 1980's to provide airbreathing propulsion testing capability. In this paper, a brief history and general description of the facility are presented along with a discussion of the types of supported testing. Recently completed tests are discussed to explain the capabilities this facility provides and to demonstrate the experience of the staff.
Document ID
20000058170
Acquisition Source
Langley Research Center
Document Type
Preprint (Draft being sent to journal)
Authors
Hodge, Jeffrey S.
(NASA Langley Research Center Hampton, VA United States)
Harvin, Stephen F.
(NASA Langley Research Center Hampton, VA United States)
Date Acquired
September 7, 2013
Publication Date
January 1, 2000
Subject Category
Research And Support Facilities (Air)
Report/Patent Number
AIAA Paper 2000-2646
Report Number: AIAA Paper 2000-2646
Meeting Information
Meeting: Advanced Measurement Technology and Ground Testing
Location: Denver, CO
Country: United States
Start Date: June 19, 2000
End Date: June 22, 2000
Sponsors: American Inst. of Aeronautics and Astronautics
Distribution Limits
Public
Copyright
Public Use Permitted.
No Preview Available