NASA Logo

NTRS

NTRS - NASA Technical Reports Server

Press Enter or click the Search button to begin your search.

Back to Results
Experiments in Aligning Threaded Parts Using a Robot HandTechniques for determining and correcting threaded part alignment using force and angular position data are developed to augment currently limited techniques for align- ing threaded parts. These new techniques are based on backspinning a nut with respect to a bolt and measuring the force change that occurs when the bolt "falls" into the nut. Kinematic models that describe the relationship between threaded parts during backspinning are introduced and are used to show how angular alignment may be determined. The models indicate how to distinguish between the aligned and misaligned cases of a bolt and a nut connection by using axial force data only. In addition, by tracking the in-plane relative attitude of the bolt during spinning, data can be obtained on the direction of the angular misalignment which, in turn, is used to correct the misalignment. Results from experiments using a bolt held in a specialized fixture and a three fingers Stanford/JPL hand are presented.
Document ID
20000083876
Acquisition Source
Johnson Space Center
Document Type
Other
Authors
Diftler, M. A.
(Lockheed Martin Corp. Houston, TX United States)
Walker, I. D.
(Clemson Univ. SC United States)
Date Acquired
September 7, 2013
Publication Date
May 1, 1999
Subject Category
Cybernetics, Artificial Intelligence And Robotics
Funding Number(s)
CONTRACT_GRANT: N00014-96-C-0320
CONTRACT_GRANT: NAG9-845
CONTRACT_GRANT: NSF CMS-95-32081
CONTRACT_GRANT: NAS9-19100
Distribution Limits
Public
Copyright
Work of the US Gov. Public Use Permitted.
No Preview Available