Evaluation of the Spherical Flange Concept for a Rocket Engine

Due to the inherent tolerance variability of hardware, flange misalignments occur during installation of mating components for a liquid propellant rocket engine. Flange misalignments include axial, lateral, and angular offsets. If these misalignments are high, they can impart significant loads into the two mating components. These significant loads can then be a driver in the design of the propellant ducts. Such was the case for the Rocketdyne RS-83 engine design for the Space Launch Initiative Program. To address this flange misalignment issue, Marshall Space Flight Center joined with Rocketdyne to develop and test a spherical flange system that allows for misalignment, yet reduces loads imparted, and at the same time provides sufficient sealing against leakage. The flange design was tested to evaluate and compare performance parameters such as misalignment and leakage. The environmental conditions ranged from -100 to 400 degrees Fahrenheit (F) with 1000 to 4000 pounds per square inch gage (psig) pressure. The desirable design features will be extracted and synthesized into a new flange design concept. This paper will address the spherical flange design and the test results.