Investigation of Net-Thrust and Base-Pressure Characteristics of Cylindrical Afterbodies with Clustered Supersonic Nozzles at Transonic Mach Numbers

A wind-tunnel investigation has been conducted at Mach numbers from 0.9 to 1.4 to determine the net-thrust and base-pressure characteristics of cylindrical afterbodies having clustered supersonic nozzles. The design Mach numbers of the nozzles were 2.0 and 2.5 and the number of clustered nozzles ranged from two to six. The nozzles had throat-to- base diameter ratios of 0.155, 0.225, 0.278, and 0.320. Some models were tested with various configurations of extended, shrouded, flush, and canted nozzles. The nozzles discharged unheated air from the base at ratios of jet total pressure to free-stream static pressure ranging from 1 to approximately 20. The results of this investigation showed that both the ratio of total exit area to base area and the number of jets affect the net-thrust factor to a significant degree for the extended-nozzle configurations. Good net-thrust factors were obtained with all the model configurations near the design jet total-pressure ratio; however, the extended-nozzle configuration had the highest net-thrust factor over the test jet total- pressure-ratio range. Canting the twin nozzles outward resulted in a favorable thrust factor over a limited jet total-pressure-ratio range, and surrounding the nozzles with a single shroud reduced thrust factors for the range of jet total-pressure ratio of this investigation.