Space Shuttle Main Engine Implications for the Abort-to-Orbit Off-the-Pad Study

In 2001, the Space Shuttle Main Engine (SSME) project office was contacted by the Space Shuttle Ascent Guidance, Navigation, and Control group to provide the engine perspective for an Abort-to-Orbit (ATO) study. The purpose of the AT0 Off-the-Pad study was to determine the feasibility of eliminating the Return to Launch Site and Transatlantic abort modes by using a five-segment solid rocket booster and throttling the remaining SSMEs to a higher power level. This would enable all abort modes to be Abort-to-Orbit. The SSME project office at Marshall Space Flight Center collaborated with MSFC's Space Transportation Directorate and Rocketdyne Propulsion and Power to provide the AT0 Off-the-Pad study with the analysis required. Power levels at 109%, 1 11% and 1 13% of rated power level were studied as well as mixture ratio decreases down to 5.85. SSME was to evaluate and define the technical and programmatic impacts to certify the SSME to these abort power levels. The SSME systems analysis group performed a steady state analysis using the SSME power balance model to determine if there were any technical issues associated with higher power level, low mixture ratio operation. Based on each power level/mixture ratio combination, an engine certification plan was created and a preliminary probabilistic risk assessment was performed. The results showed favorable results for higher power 1evel/lower mixture ratio SSME operation. In nearly all performance and redline parameters, the traded engine operation was encompassed by nominal engine performance of a prior engine configuration.