NASA Logo

NTRS

NTRS - NASA Technical Reports Server

Press Enter or click the Search button to begin your search.

Back to Results
Product Module Rig TestThe low emissions potential of a Rich-Quench-Lean (RQL) combustor for use in the High Speed Civil Transport (HSCT) application was evaluated as part of Work Breakdown Structure (WBS) 1.0.2.7 of the NASA Critical Propulsion Components (CPC) Program under Contract NAS3-27235. Combustion testing was conducted in cell 1E of the Jet Burner Test Stand at United Technologies Research Center. Specifically, a Rich-Quench-Lean combustor, utilizing reduced scale quench technology implemented in a quench vane concept in a product-like configuration (Product Module Rig), demonstrated the capability of achieving an emissions index of nitrogen oxides (NOx EI) of 8.5 gm/Kg fuel at the supersonic flight condition (relative to the program goal of 5 gm/Kg fuel). Developmental parametric testing of various quench vane configurations in the more fundamental flametube, Single Module Rig Configuration, demonstrated NOx EI as low as 5.2. All configurations in both the Product Module Rig configuration and the Single Module Rig configuration demonstrated exceptional efficiencies, greater than 99.95 percent, relative to the program goal of 99.9 percent efficiency at supersonic cruise conditions. Sensitivity of emissions to quench orifice design parameters were determined during the parametric quench vane test series in support of the design of the Product Module Rig configuration. For the rectangular quench orifices investigated, an aspect ratio (length/width) of approximately 2 was found to be near optimum. An optimum for orifice spacing was found to exist at approximately 0.167 inches, resulting in 24 orifices per side of a quench vane, for the 0.435 inch quench zone channel height investigated in the Single Module Rig. Smaller quench zone channel heights appeared to be beneficial in reducing emissions. Measurements were also obtained in the Single Module Rig configuration on the sensitivity of emissions to the critical combustor parameters of fuel/air ratio, pressure drop, and residence time. Minimal sensitivity was observed for all of these parameters.
Document ID
20040035609
Acquisition Source
Headquarters
Document Type
Contractor Report (CR)
Authors
Holdeman, James D.
(NASA Glenn Research Center Cleveland, OH, United States)
Chiappetta, Louis, Jr.
(Pratt and Whitney Aircraft West Palm Beach, FL, United States)
Hautman, Donald J.
(Pratt and Whitney Aircraft West Palm Beach, FL, United States)
Ols, John T.
(Pratt and Whitney Aircraft West Palm Beach, FL, United States)
Padget, Frederick C., IV
(Pratt and Whitney Aircraft West Palm Beach, FL, United States)
Peschke, William O. T.
(Pratt and Whitney Aircraft West Palm Beach, FL, United States)
Shirley, John A.
(Pratt and Whitney Aircraft West Palm Beach, FL, United States)
Siskind, Kenneth S.
(Pratt and Whitney Aircraft West Palm Beach, FL, United States)
Date Acquired
September 7, 2013
Publication Date
February 1, 2004
Subject Category
Aircraft Propulsion And Power
Report/Patent Number
NASA/CR-2004-212880
MTD211AA
E-14294
Report Number: NASA/CR-2004-212880
Report Number: MTD211AA
Report Number: E-14294
Funding Number(s)
WBS: WBS 22-714-01-39
CONTRACT_GRANT: NAS3-27235
Distribution Limits
Public
Copyright
Work of the US Gov. Public Use Permitted.
No Preview Available