Active Control of Instabilities in Laminar Boundary-Layer Flow: Use of Sensors and Spectral Controller - Part 2

This study focuses on the suppression of instability growth using an automated active-control technique. The evolution of 2D disturbances that are spatially growing in a flat-plate boundary layer are computed with a spatial DNS code. A controller receives wall sensor information (pressure or shear) as input and provides a signal that controls an actuator response as output. The control law assumes that wave cancellation is valid. The results indicate that a measure of wave cancellation can be obtained for small- and large-amplitude instabilities without feedback; however, feedback is required to optimize the control amplitude and phase for exact wave cancellation.