NASA Logo

NTRS

NTRS - NASA Technical Reports Server

Press Enter or click the Search button to begin your search.

Back to Results
Centaur Test Bed (CTB) for Cryogenic Fluid ManagementFuture missions such as NASA s space exploration vision and DOD satellite servicing will require significant increases in the understanding and knowledge of space based cryogenic fluid management (CFM), including the transfer and storage of cryogenic fluids. Existing CFM capabilities are based on flight of upper stage cryogenic vehicles, scientific dewars, a few dedicated flight demonstrations and ground testing. This current capability is inadequate to support development of the CEV cryogenic propulsion system, other aspects of robust space exploration or the refueling of satellite cryo propulsion systems with reasonable risk. In addition, these technologies can provide significant performance increases for missions beyond low-earth orbit to enable manned missions to the Moon and beyond. The Centaur upper-stage vehicle can provide a low cost test platform for performing numerous flight demonstrations of the full breadth of required CFM technologies to support CEV development. These flight demonstrations can be performed as secondary mission objectives using excess LH2 and/or LO2 from the main vehicle propellant tanks following primary spacecraft separation at minimal cost and risk.
Document ID
20060049150
Acquisition Source
Glenn Research Center
Document Type
Contractor Report (CR)
Authors
Sakla, Steven
(Lockheed Martin Space Systems Co. Denver, CO, United States)
Kutter, Bernard
(Lockheed Martin Space Systems Co. Denver, CO, United States)
Wall, John
(Lockheed Martin Space Systems Co. Denver, CO, United States)
Date Acquired
September 7, 2013
Publication Date
September 1, 2006
Subject Category
Fluid Mechanics And Thermodynamics
Report/Patent Number
E-15689
AIAA Paper 2006-4603
NASA/CR-2006-214410
Report Number: E-15689
Report Number: AIAA Paper 2006-4603
Report Number: NASA/CR-2006-214410
Meeting Information
Meeting: 42nd AIAA/ASME/SAE/ASEE Joint Propulsion Conference & Exhibit
Location: Sacramento, CA
Country: United States
Start Date: July 9, 2006
End Date: July 12, 2006
Sponsors: American Inst. of Aeronautics and Astronautics, Society of Automotive Engineers, Inc., American Society of Mechanical Engineers, American Society for Engineering Education
Funding Number(s)
CONTRACT_GRANT: NNC05QA89P
WBS: WBS 492994.05.01.01.03.02
Distribution Limits
Public
Copyright
Work of the US Gov. Public Use Permitted.
No Preview Available