Rotating Intershaft Brush Seal Project

The pursuit of high Mach number flight presents several challenges to the airframe and engine design engineers. Most obvious is the resulting high temperatures encountered as the aircraft approaches Mach 3 and above. The encountered high temperatures and shaft speeds of engines require rethinking in the areas of material selections, component design and component operating life. In the area of sump compartment sealing, one of the most difficult sealing applications is the sealing of an engine s rear sump. Normally this sump will need some method of sealing between two rotating shafts. This sealing operation is done with an intershaft seal. The aft sump region also presents an additional design requirement for the intershaft seal. This region has to absorb the engine s thermal growth, which means that in the seal area, axial movement, on the order of 0.30 in., between the rotating shafts must be tolerated. A new concept or new technology of sealing an intershaft sump configuration is being developed. This concept, called a rotating intershaft brush seal has key attributes that will allow this seal to perform better, in the demanding environment of sealing an aft sump with two rotating shafts, when compared to today s sealing technology of labyrinth and carbon sea