NASA Logo

NTRS

NTRS - NASA Technical Reports Server

Press Enter or click the Search button to begin your search.

Back to Results
Quiet Spike(TradeMark) Build-up Ground Vibration Testing ApproachFlight tests of Gulfstream Aerospace Corporation s Quiet Spike(TradeMark) hardware were recently completed on the NASA Dryden Flight Research Center F-15B airplane. NASA Dryden uses a modified F-15B airplane as a testbed aircraft to cost-effectively fly flight research experiments that are typically mounted underneath the F-15B airplane, along the fuselage centerline. For the Quiet Spike(TradeMark) experiment, however, instead of a centerline mounting, a relatively long forward-pointing boom was attached to the radar bulkhead of the F-15B airplane. The Quiet Spike(TradeMark) experiment is a stepping-stone to airframe structural morphing technologies designed to mitigate the sonic-boom strength of business jets over land. The Quiet Spike(TradeMark) boom is a concept in which an aircraft s noseboom would be extended prior to supersonic acceleration. This morphing effectively lengthens the aircraft, thus reducing the peak sonic-boom amplitude, but is also expected to partition the otherwise strong bow shock into a series of reduced-strength, noncoalescing shocklets. Prior to flying the Quiet Spike(TradeMark) experiment on the F-15B airplane several ground vibration tests were required to understand the Quiet Spike(TradeMark) modal characteristics and coupling effects with the F-15B airplane. However, due to the flight hardware availability and compressed schedule requirements, a "traditional" ground vibration test of the mated F-15B Quiet Spike(TradeMark) ready-for- flight configuration did not leave sufficient time available for the finite element model update and flutter analyses before flight testing. Therefore, a "nontraditional" ground vibration testing approach was taken. This paper provides an overview of each phase of the "nontraditional" ground vibration testing completed for the Quiet Spike(TradeMark) project which includes the test setup details, instrumentation layout, and modal results obtained in support of the structural dynamic modeling and flutter analyses.
Document ID
20070018156
Acquisition Source
Armstrong Flight Research Center
Document Type
Conference Paper
Authors
Spivey, Natalie D.
(NASA Dryden Flight Research Center Edwards, CA, United States)
Herrera, Claudia Y.
(NASA Dryden Flight Research Center Edwards, CA, United States)
Truax, Roger
(NASA Dryden Flight Research Center Edwards, CA, United States)
Pak, Chan-gi
(NASA Dryden Flight Research Center Edwards, CA, United States)
Freund, Donald
(Gulfstream Aerospace Corp. Bethany, OK, United States)
Date Acquired
August 23, 2013
Publication Date
April 26, 2007
Subject Category
Aircraft Design, Testing And Performance
Meeting Information
Meeting: 48th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference
Location: Waikiki, HI
Country: United States
Start Date: April 23, 2007
End Date: April 26, 2007
Sponsors: American Society of Mechanical Engineers, American Society of Civil Engineers, American Inst. of Aeronautics and Astronautics, American Helicopter Society, Inc., American Society for Composites
Distribution Limits
Public
Copyright
Public Use Permitted.
No Preview Available