Reducing Interference in ATC Voice Communication

Three methods have been proposed to be developed to enable reduction of the types of interference that often occur among voice-communication radio signals involved in air-traffic control (ATC). For historical reasons and for compatibility with some navigation systems, control towers and aircraft use amplitude modulation (AM) for voice communication. In the presence of two simultaneous AM transmissions in the same frequency channel, what is heard through a receiver includes not only the audio portions of both transmissions but also an audio heterodyne signal at the difference between the carrier frequencies of the transmissions (as a practical matter, the carrier frequencies almost always differ somewhat). The situation is further complicated by multiple heterodyne signals in the presence of more than two simultaneous transmissions. Even if one of the transmissions does not include AM because of a transmitter malfunction or because a transmitter was inadvertently turned on or left on, the heterodyne signal makes it difficult to understand the audio of the other transmission. The proposed methods would utilize digital signal processing to counteract this type of interference.