NASA Logo

NTRS

NTRS - NASA Technical Reports Server

Back to Results
Making Activated Carbon by Wet Pressurized PyrolysisA wet pressurized pyrolysis (wet carbonization) process has been invented as a means of producing activated carbon from a wide variety of inedible biomass consisting principally of plant wastes. The principal intended use of this activated carbon is room-temperature adsorption of pollutant gases from cooled incinerator exhaust streams. Activated carbon is highly porous and has a large surface area. The surface area depends strongly on the raw material and the production process. Coconut shells and bituminous coal are the primary raw materials that, until now, were converted into activated carbon of commercially acceptable quality by use of traditional production processes that involve activation by use of steam or carbon dioxide. In the wet pressurized pyrolysis process, the plant material is subjected to high pressure and temperature in an aqueous medium in the absence of oxygen for a specified amount of time to break carbon-oxygen bonds in the organic material and modify the structure of the material to obtain large surface area. Plant materials that have been used in demonstrations of the process include inedible parts of wheat, rice, potato, soybean, and tomato plants. The raw plant material is ground and mixed with a specified proportion of water. The mixture is placed in a stirred autoclave, wherein it is pyrolized at a temperature between 450 and 590 F (approximately between 230 and 310 C) and a pressure between 1 and 1.4 kpsi (approximately between 7 and 10 MPa) for a time between 5 minutes and 1 hour. The solid fraction remaining after wet carbonization is dried, then activated at a temperature of 500 F (260 C) in nitrogen gas. The activated carbon thus produced is comparable to commercial activated carbon. It can be used to adsorb oxides of sulfur, oxides of nitrogen, and trace amounts of hydrocarbons, any or all of which can be present in flue gas. Alternatively, the dried solid fraction can be used, even without the activation treatment, to absorb oxides of nitrogen.
Document ID
20110014134
Acquisition Source
Ames Research Center
Document Type
Other - NASA Tech Brief
Authors
Fisher, John W.
(NASA Ames Research Center Moffett Field, CA, United States)
Pisharody, Suresh
(Lockheed Martin Corp. Moffett Field, CA, United States)
Wignarajah, K.
(Lockheed Martin Corp. Moffett Field, CA, United States)
Moran, Mark
(Lockheed Martin Corp. Moffett Field, CA, United States)
Date Acquired
August 25, 2013
Publication Date
November 1, 2006
Publication Information
Publication: NASA Tech Briefs, November 2006
Subject Category
Man/System Technology And Life Support
Report/Patent Number
ARC-14929-1
Distribution Limits
Public
Copyright
Public Use Permitted.
No Preview Available