NASA Logo

NTRS

NTRS - NASA Technical Reports Server

Back to Results
Software Computes Tape-Casting ParametersTcast2 is a FORTRAN computer program that accelerates the setup of a process in which a slurry containing metal particles and a polymeric binder is cast, to a thickness regulated by a doctor blade, onto fibers wound on a rotating drum to make a green precursor of a metal-matrix/fiber composite tape. Before Tcast2, setup parameters were determined by trial and error in time-consuming multiple iterations of the process. In Tcast2, the fiber architecture in the final composite is expressed in terms of the lateral distance between fibers and the thickness-wise distance between fibers in adjacent plies. The lateral distance is controlled via the manner of winding. The interply spacing is controlled via the characteristics of the slurry and the doctor-blade height. When a new combination of fibers and slurry is first cast and dried to a green tape, the shrinkage from the wet to the green condition and a few other key parameters of the green tape are measured. These parameters are provided as input to Tcast2, which uses them to compute the doctor-blade height and fiber spacings needed to obtain the desired fiber architecture and fiber volume fraction in the final composite.
Document ID
20110023603
Acquisition Source
Glenn Research Center
Document Type
Other - NASA Tech Brief
Authors
deGroh, Henry C., III
(NASA Glenn Research Center Cleveland, OH, United States)
Date Acquired
August 25, 2013
Publication Date
February 1, 2003
Publication Information
Publication: NASA Tech Briefs, February 2003
Subject Category
Man/System Technology And Life Support
Report/Patent Number
LEW-17323
Distribution Limits
Public
Copyright
Public Use Permitted.
No Preview Available