NASA Logo

NTRS

NTRS - NASA Technical Reports Server

Press Enter or click the Search button to begin your search.

Back to Results
High Angular Resolution Imaging of Solar Radio Bursts from the Lunar SurfaceLocating low frequency radio observatories on the lunar surface has a number of advantages, including positional stability and a very low ionospheric radio cutoff. Here, we describe the Radio Observatory on the lunar Surface for Solar studies (ROLSS), a concept for a low frequency, radio imaging interferometric array designed to study particle acceleration in the corona and inner heliosphere. ROLSS would be deployed during an early lunar sortie or by a robotic rover as part of an unmanned landing. The preferred site is on the lunar near side to simplify the data downlink to Earth. The prime science mission is to image type II and type III solar radio bursts with the aim of determining the sites at and mechanisms by which the radiating particles are accelerated. Secondary science goals include constraining the density of the lunar ionosphere by measuring the low radio frequency cutoff of the solar radio emissions or background galactic radio emission, measuring the flux, particle mass, and arrival direction of interplanetary and interstellar dust, and constraining the low energy electron population in astrophysical sources. Furthermore, ROLSS serves a pathfinder function for larger lunar radio arrays. Key design requirements on ROLSS include the operational frequency and angular resolution. The electron densities in the solar corona and inner heliosphere are such that the relevant emission occurs below 10 M Hz, essentially unobservable from Earth's surface due to the terrestrial ionospheric cutoff. Resolving the potential sites of particle acceleration requires an instrument with an angular resolution of at least 2 deg at 10 MHz, equivalent to a linear array size of approximately one kilometer. The major components of the ROLSS array are 3 antenna arms, each of 500 m length, arranged in a Y formation, with a central electronics package (CEP) at their intersection. Each antenna arm is a linear strip of polyimide film (e.g., Kapton(TradeMark)) on which 16 single polarization dipole antennas are located by depositing a conductor (e.g., silver). The arms also contain transmission lines for carrying the radio signals from the science antennas to the CEP. Operations would consist of data acquisition during the lunar day, with data downlinks to Earth one or more times every 24 hours.
Document ID
20120001921
Acquisition Source
Goddard Space Flight Center
Document Type
Other
Authors
MacDowall, Robert J.
(NASA Goddard Space Flight Center Greenbelt, MD, United States)
Lazio, Joseph
(NASA Goddard Space Flight Center Greenbelt, MD, United States)
Bale, Stuart
(California Univ. Berkeley, CA, United States)
Burns, Jack O.
(Colorado Univ. Boulder, CO, United States)
Farrell, William M.
(NASA Goddard Space Flight Center Greenbelt, MD, United States)
Gopalswamy, Nat
(NASA Goddard Space Flight Center Greenbelt, MD, United States)
Jones, Dayton L.
(Jet Propulsion Lab., California Inst. of Tech. Pasadena, CA, United States)
Kasper, Justin Christophe
(Harvard Univ. Cambridge, MA, United States)
Weiler, Kurt
(Naval Research Lab. Washington, DC, United States)
Date Acquired
August 25, 2013
Publication Date
December 5, 2012
Subject Category
Astrophysics
Report/Patent Number
GSFC.ABS.5539.2011
Report Number: GSFC.ABS.5539.2011
Meeting Information
Meeting: AGU Fall Meeting 2011
Location: San Francisco, CA
Country: United States
Start Date: December 5, 2011
End Date: December 9, 2011
Sponsors: American Geophysical Union
Funding Number(s)
CONTRACT_GRANT: NNA09DB30A
Distribution Limits
Public
Copyright
Public Use Permitted.
No Preview Available